 |
I think that the front arches look much better
when they are closer to the tyre.
|
 |
Carbon Look mirros from Stuart Taylor Motorsport
or Melin Motorsport, look excellent and cost around £50 GBP per
pair
|
 |
|
 |
The complete car ready for SVA.
See the
SVA Report to see how I got on.
|
 |
The SVA Inspector failed my Locost on various
items these nex few images show what was done to correct the issues.
The luggage space must be covered either with
a solid cover like this one, wood covered with vinyl or a tonneu cover
etc
|
 |
The Front indicators supplied from Stuart Taylor
were too far inboard so had to be moved, I used a piece of ali, turned
it on the lathe to make these.
|
 |
Close up of the indicator modification
|
 |
The sharp edges in the cockpit area have to be
covered, you can see the rubber edging here.
|
 |
Front suspension sharp edges also have to be covered
i used heater hose to cover these, you must not use foam rubber and tape
as this will fail.
|
 |
|
 |
Another shot of rear boot cover
|
 |
Headlamp brackets on Stuart Taylor cars are sharp
and need to be looked at, i used rubber hose with a slot cut into it.
|